No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete remote_replication_dcl

delete remote_replication_dcl

Function

The delete remote_replication_dcl command is used to forcibly delete the remote replication DCL of a specified LUN.

Format

delete remote_replication_dcl lun_id=? dcl_id=?

Parameters

Parameter

Description

Value

lun_id=?

Indicates the ID of a LUN.

To obtain the value, run "show lun general".

dcl_id=?

Indicates the ID of a DCL.

To obtain the value, run "dcl showdclid".

Views

Developer view

Usage Guidelines

  • Do not use this command without R&D engineers' guidance. This command can only be used when you need to delete the DCL and you cannot delete the remote replication with incorrect DB information. Do not use this command in other scenarios.
  • This command must be used with the "delete remote_replication_db" command. After deleting the corresponding DCL resources, restart the system.

Example

None

developer:/>delete remote_replication_dcl lun_id=0 dcl_id=3 
DANGER: You are clearing the remote replication DCL of a specified LUN, this operation will forcibly delete the DCL of remote replication. 
Suggestion: Before you perform this operation, please contact technical support engineers. 
Have you read danger alert message carefully?(y/n)y 

Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 637548

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next