No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
rep showtrace

rep showtrace

Function

The rep showtrace command is used to query trace information.

Format

rep showtrace [pid] [Type] [localId] [opcode]

Parameters

Parameter

Description

Value

pid

Module ID.

Any valid module ID.

Type

Type of a HyperMetro object.

The value can be "0", "1", or "2", where:

  • "0": The object is a pair.
  • "1": The object is a CG.
  • "2": The object is a domain.

localId

Local ID.

To obtain the value, run the "show hyper_metro_pair general" command.

opcode

Operation code.

Any valid operation code.

Views

Diagnostic view

Usage Guidelines

None

Example

Query trace information.

admin:/diagnose>rep showtrace 632 0 0 0 
Flow Name: OPCODE_CREATE 
General Info: 
------ ------------------ ---------- ----------- ------- 
PairId 0x0 SucCnt 1 FailCnt 0 RuningStatus success 

Detail Info: 
Id       Start Time             cmd Name 
-- -------------------- ------------------------ 
  00  2015-08-04/03:36:36 UTC REPHC_OPCODE_START_BGR            REPHC_ACTION_COMMON_LOG_COM              
  01  2015-08-04/03:36:36 UTC REPHC_OPCODE_START_BGR            REPHC_ACTION_CRTPRE_INDEX_COM            
  02  2015-08-04/03:36:36 UTC REPHC_OPCODE_START_BGR            REPHC_ACTION_CRTPRE_CREATE_PAIR       
  03  2015-08-04/03:36:36 UTC REPHC_OPCODE_START_BGR            REPHC_ACTION_CRTPRE_CREATE_DB            
  04  2015-08-04/03:36:36 UTC REPHC_OPCODE_START_BGR            REPHC_ACTION_CRTPRE_CREATE_PAIR_RUN      
  05  2015-08-04/03:36:36 UTC REPHC_OPCODE_START_BGR            REPHC_ACTION_ADD_ARB_TO_DOMAIN           
  06  2015-08-04/03:36:36 UTC REPHC_OPCODE_START_BGR            REPHC_ACTION_COMMON_DEL_DSLOG            
  07  2015-08-04/03:36:36 UTC REPHC_OPCODE_START_BGR            REPHC_ACTION_TASK_OVER                   
admin:/diagnose>

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Flow Name

Process name.

General Info

General information.

PairId

HyperMetro ID.

SucCnt

Success count.

FailCnt

Failure count.

RuningStatus

Running status.

Detail Info

Details.

Id

ID.

Start Time

Start time.

cmd Name

Command name.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 639151

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next