No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show rsf upgrade_check_info

show rsf upgrade_check_info


The show rsf upgrade_check_info command is used to query the cause for replication subsystem check failure during the upgrade evaluation, pre-upgrade check, and upgrade.


show rsf upgrade_check_info [ record_id=? ]






Upgrade check record ID.



Developer view

Usage Guidelines

If the upgrade check fails to be performed on the replication subsystem during the upgrade evaluation, pre-upgrade check, or upgrade, this command is used to query the cause.


  • Batch query detail upgrade checking information of the replication subsystem.
    developer:/>show rsf upgrade_check_info 
    Record ID  Object Type Object ID  Error Code 
    ---------  -------------  ---------  ---------- 
    0          Remote Device  0          0x4000F305 
    1          Remote Device  2          0x4000F305
  • Query single upgrade check record of replication subsystem.
    developer:/>show rsf upgrade_check_info record_id=0 
    Record ID: 0 
    Object Type: Remote Device 
    Object ID: 0 
    Error Code: 0x4000F305 
    Error: Some remote link(s) of the remote device are fault.  
    Suggestion: Please repair the fault links and retry.

System Response

The following table describes the parameter meanings.



Record ID

ID of the check result item.

Object Type

Type of the checked object.

Object ID

Object ID of the check record.

Error Code

Error code of the check result.

Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 638400

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next