No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
fmt showdisk

fmt showdisk

Function

The fmt showdisk command is used to query formatting information about member disks in the specified disk domain.

Format

fmt showdisk -p poolId

Parameters

Parameter

Description

Value

poolId

Disk domain ID.

To obtain the value, run the "show disk_domain general" command.

Views

Diagnostic view

Usage Guidelines

None

Example

Query formatting information about member disks in the specified disk domain.

admin:/diagnose>fmt showdisk -p 0 
DiskID           TotalSize        Lba              speed(sec/s)     rate             remain times     
------           ---------        ----------       ----------       ----------       ----------       
523              1170417584       1170417584       0                100              0 
525              1170417584       1170417584       0                100              0 
527              1170417584       1170417584       0                100              0 
531              1170417584       1170417584       0                100              0 
532              1170417584       1170417584       0                100              0 
533              1170417584       1170417584       0                100              0 
534              1170417584       1170417584       0                100              0 
535              1170417584       1170417584       0                100              0 
admin:/diagnose>

System Response

The following table describes the parameter meanings.

Parameter

Meaning

DiskID

Disk ID.

TotalSize

Disk capacity.

Lba

Logical block addressing (LBA) of the disk that has been formatted.

speed(sec/s)

Disk formatting speed (expressed in sector/second).

rate

Formatting progress.

remain times

Remaining time.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 612710

Downloads: 242

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next