No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
lswwrite

lswwrite

Function

The lswwrite command is used to write values to the LSW register.

Format

lswwrite <mdio_addr> <dev_addr> <reg_addr> <val>

Parameters

Parameter

Description

Value

mdio_addr

LSW address on the MDIO bus..

Enter the value as required.

dev_addr

Device address of the LSW register.

Enter the value as required.

reg_addr

Device offset address of the LSW register.

Enter the value as required.

val

Value to be written.

Enter the value as required.

Modes

serial port mode

Usage Guidelines

The LAN switch chip must be used.

Example

Write values to the LSW register.

Hi1710_UBOOT> lswwrite 0x1 0x0 0x16 0x3

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 617889

Downloads: 244

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next