No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show disk_bom blacklist

show disk_bom blacklist


The show disk_bom blacklist command is used to show disk items in a BOM blacklist.


show disk_bom blacklist [ detail=? ]






Detailed information.

The value is "yes" or "no", where:

  • "yes": shows a detailed BOM list.
  • "no": shows a brief BOM list.


Developer view

Usage Guidelines



  • Show a brief disk BOM list in the BOM blacklist.
    developer:/>show disk_bom blacklist 
    BOM Code : 02350SMW,02350SNC,02350SND,02350SNJ,02350SNK,02350SNM,02350SNN,02350TLR
  • Show a detailed disk BOM list in the BOM blacklist.
    developer:/>show disk_bom blacklist detail=yes 
    Init BOM Code : 02350SMW,02350SNC,02350SND,02350SNJ,02350SNK,02350SNM,02350SNN,02350TLR 
    Add BOM Code : 02350SMW,02350SNC,02350SNE 
    Del BOM Code : 02350SNJ,02350SNK

System Response

The following table describes the parameter meanings.



Init BOM Code

Initial list that contains the disk items pre-configured from the factory.

Add BOM Code

Added list that contains the disk items added by users through CLI.

BOM Code

Total list that contains the disk items pre-configured from the factory and configured by users.

Del BOM Code

Deleted list that contains the disk items deleted by users through CLI.

Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 638459

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next