No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change disk_domain_possessed general

change disk_domain_possessed general

Function

The change disk_domain_possessed general command is used to set the possess information about the disk domain.

Format

change disk_domain_possessed general disk_domain_id=? tier_type=? possess_type=? possess_number=?

Parameters

Parameter

Description

Value

disk_domain_id=?

ID of the disk domain whose setting must be changed.

Run the "show disk_domain general" command without any parameters to obtain the value.

tier_type=?

Tier type.

The value can be SSD, SAS, or NearLine_SAS.

possess_type=?

Sets the possess type.

The value can be page or chunk.

possess_number=?

Sets the possess size.

The value can be page or chunk.

  • The value of page is an integer between 65,536 and 999,999,999.
  • The value of chunk is an integer between 12,288 and 999,999,999.

Views

Developer view

Usage Guidelines

Before running the command,ensure that services have been stopped.Otherwise, services may be interrupted.

Example

Sets the possess information of the disk domain whose ID is 0.

developer:/>change disk_domain_possessed general disk_domain_id=0 tier_type=SAS possess_type=page possess_number=65536 
WARNING:You are about to modify the available cache quantity of disk domain. This operation will cause cache resource to be re-allocated, then system performance may be degraded. 
Suggestion:Before performing this operation, ensure that the correct parameter is configured. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 615284

Downloads: 244

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next