No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
xnet showpeerinfo

xnet showpeerinfo

Function

The xnet showpeerinfo command is used to show information about the destination node.

Format

xnet showpeerinfo [ -c controller ]

Parameters

Parameter

Description

Value

controller

Node ID.

The value ranges from 0 to 15.

Views

Diagnostic view

Usage Guidelines

None

Example

  • Show information about destination node "1".
    admin:/diagnose>xnet showpeerinfo -c 1 
    dstnid  Ctrl                           Data                                                       FaultProcess 
    ------  --------------------------- ---------------------------------------------------------  ------------------------------------------- 
    ------  LinkFlag DestoryNum Up/Down LinkFlag DestoryNum Up/Down AbsUp ConnShut AllConnShut  MacConflictCnt Notify FaultNid  FaultCostNs 
    1       0        0            1/1      0        0            1/1      1     0        0            0              0      0         0
  • Show information about all destination nodes.
    admin:/diagnose>xnet showpeerinfo 
    dstnid  Ctrl                           Data                                                       FaultProcess 
    ------  --------------------------- ---------------------------------------------------------  ------------------------------------------- 
    ------  LinkFlag DestoryNum Up/Down LinkFlag DestoryNum Up/Down AbsUp ConnShut AllConnShut  MacConflictCnt Notify FaultNid  FaultCostNs 
    0       0        0            0/1      0        0            0/1      0     0        0            0              0      0         0 
    1       0        0            1/1      0        0            1/1      1     0        0            0              0      0         0 
    2       0        0            3/3      0        0            2/3      6     0        0            0              0      2         1505620 
    3       0        0            2/1      0        0            1/1      4     0        0            0              0      3         2131340 
    4       0        0            0/1      0        0            0/1      0     0        0            0              0      0         0 
    5       0        0            0/1      0        0            0/1      0     0        0            0              0      0         0 
    6       0        0            0/1      0        0            0/1      0     0        0            0              0      0         0 
    7       0        0            0/1      0        0            0/1      0     0        0            0              0      0         0 
    8       0        0            0/1      0        0            0/1      0     0        0            0              0      0         0 
    9       0        0            0/1      0        0            0/1      0     0        0            0              0      0         0 
    10      0        0            0/1      0        0            0/1      0     0        0            0              0      0         0 
    11      0        0            0/1      0        0            0/1      0     0        0            0              0      0         0 
    12      0        0            0/1      0        0            0/1      0     0        0            0              0      0         0 
    13      0        0            0/1      0        0            0/1      0     0        0            0              0      0         0 
    14      0        0            0/1      0        0            0/1      0     0        0            0              0      0         0 
    15      0        0            0/1      0        0            0/1      0     0        0            0              0      0         0

System Response

The following table describes the parameter meanings.

Parameter

Meaning

dstnid

Destination node ID.

Ctrl

Control plane.

Data

Data plane.

FaultProcess

Process of handling node faults.

LinkFlag

Flag of link status.

DestoryNum

Number of links of resources to be cleared.

Up/Down

Times of Up/Down.

AbsUp

Times of absolute Up.

ConnShut

Mark of closing all data connections to this node.

AllConnShut

Mark of closing all connections to this node.

MacConflictCnt

Count of controller MAC address conflicts.

Notify

Mark of notifying the node fault synchronized at the XNET layer.

FaultNid

ID of the faulty node.

FaultCostNs

Time spent on handling node faults (unit: nanosecond).

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 638788

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next