No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change hyper_metro_pair full_sync_cfg

change hyper_metro_pair full_sync_cfg

Function

The change hyper_metro_pair full_sync_cfg command is used to fully synchronize configurations of a specific HyperMetro pair.

Format

change hyper_metro_pair full_sync_cfg pair_id=? partition_type=?

Parameters

Parameter

Description

Value

pair_id

HyperMetro pair ID.

Run the "show hyper_metro_pair general" command to obtain the value.

partition_type

Type of a configuration synchronization partition.

  • "nfs_share": NFS share partition. Configurations in this partition include NFS share and NFS share permission.
  • "smb_share": SMB share partition. Configurations in this partition include CIFS share, CIFS share permission, IP control rule, file extension filter, and homedir rule.
  • "quota": quota partition. The configurations in this partition includes quota.

Views

Developer view

Usage Guidelines

Run this command under the guidance of R&D engineers.

Example

Fully synchronize configurations of a specific HyperMetro pair whose pair ID is "200bc79b99520000" and partition type is "nfs_share".

developer:/>change hyper_metro_pair full_sync_cfg pair_id=200bc79b99520000 partition_type=nfs_share 
WARNING: You are going to start configuration full synchronization. 
Once configuration synchronization is started, remote configuration will be overwritten by local configuration. After configuration synhronization, the configuration cannot be restored. 
Suggestion: Before performing this operation, ensure that the parameters are configured correctly to prevent configuration loss. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 636198

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next