No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show client top

show client top

Function

The show client top command is used to collect the information about the clients that access the most file systems in a specified period and display the information.

Format

show client top interval=? iteration=? controller_id=? [sort_key=?] [row=?]

Parameters

Parameter

Description

Value

interval=?

Interval at which the command is executed to perform statistics.

-

iteration=?

Times that the command is executed to perform statistics.

-

controller_id=?

Controller ID.

-

row=?

Number of top clients to be displayed.

-

sort_key=?

Sorting keyword.

-

Views

Developer view

Usage Guidelines

  • The command can be used to collect statistics at a time or multiple times. Parameter "iteration" specifies the number of statistics times. If the value of "iteration" is 0, the command is executed infinitely.
  • Performance data will be updated in real time.
  • Press q to exit from the performance data page.

Example

  • Query top 10 clients with the highest OPS.
    developer:/>show client top interval=10 iteration=2 controller_id=0A row=10 sort_key=total_ops 
    Press key "q" or ctrl-c to exit... 
      
      OPS Protocol  Controller  Tenant  Client IP        
      ----  --------  ----------  ------  -------------- 
      7724  nfsv3     0A                  192.168.1.1 
      
      OPS Protocol  Controller  Tenant  Client IP        
      ----  --------  ----------  ------  -------------- 
      6000  nfsv3     0A                  192.168.1.1
  • Query top 10 clients with the highest bandwidths.
    developer:/>show client top interval=10 iteration=2 controller_id=0A row=10 sort_key=total_data  
    Press key "q" or ctrl-c to exit... 
      
      Bandwidth(MB/s)  Controller  Protocol  Tenant  Client IP        
      ---------------  ----------  --------  ------  -------------- 
      45.257           0A          nfsv3             192.168.1.1 
      
      Bandwidth(MB/s)  Controller  Protocol  Tenant  Client IP        
      ---------------  ----------  --------  ------  -------------- 
      48.522           0A          nfsv3             192.168.1.1 

System Response

The following table describes the parameter meanings.

Parameter

Meaning

OPS

Number of operations processed per second.

Bandwidth(MB/s)

Bandwidth of I/Os processed per second.

Controller

ID of the controller whose information is collected.

Protocol

Protocol type.

Tenant

Indicates a tenant.

Client IP

Client IP address.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 617430

Downloads: 244

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next