No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show disk_group

show disk_group

Function

The show disk_group command is used to query detailed information about disk groups in a specified disk domain.

Format

show disk_group disk_domain_id=? controller=? [ tier_id=? ] [ disk_group_id=? ]

Parameters

Parameter

Description

Value

disk_doamin_id

Disk domain ID to be queried.

To obtain the value, run the "show disk_domain general" command in guest mode.

controller=?

Controller ID to be queried.

To obtain the value, run the "show controller general" command in guest mode.

tier_id

Tier ID to be queried.

To obtain the value, run the "show disk_group" command in guest mode.

disk_group_id

Disk group ID to be queried.

To obtain the value, run the "show disk_group" command in guest mode.

Views

Engineer view

Usage Guidelines

To use this command, the working controller ID of a disk domain must be specified.

Example

On controller 0A, query detailed information about disk groups in disk domain "0".

engineer:/>show disk_group disk_domain_id=0 controller=0A 

  Disk ID Pair ID  Tier Type            Disk Group ID  Disk Type     Capacity  
  ---------  -------  -------------------  -------------  ------------  --------- 
  DAE000.1 0        Extreme Performance  0              NearLine SAS  549.976GB 
  DAE000.3 0        Performance          3              SAS           549.976GB 
  DAE000.3 0        Capacity             4              NearLine SAS  549.976GB 
  DAE000.3 0        Capacity             4              SAS           549.976GB 
engineer:/>

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Disk ID

Disk ID.

Pair ID

Engine ID.

Tier Type

Disk tier type.

Disk Group ID

Disk group ID.

Disk Type

Disk type.

Capacity

Disk capacity.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 580317

Downloads: 229

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next