No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show remote_device link

show remote_device link

Function

The show remote_device link command is used to query the information on existing links to the storage system.

Format

show remote_device link [ link_type=? [ link_id=? ] | remote_device_id=? ]

Parameters

Parameter

Description

Value

link_type=?

Type of a link.

The value can be:

  • "FC": The remote device and the local device connect to each other through Fibre Channel links.
  • "iSCSI": The remote device and the local device connect to each other through iSCSI links.

link_id=?

ID of a link.

To obtain the value, run "show remote_device link" without parameters.

remote_device_id=?

ID of a remote device.

To obtain the value, run "show remote_device general".

Views

Guest, vstore user view

Usage Guidelines

  • To query the information on existing links to the storage system, run "show remote_device link".
  • To query the information on a specific link, run "show remote_device link link_type=? link_id=? ".
  • To query the information on existing links to a specific remote device, run "show remote_device link remote_device_id=? ".

Example

  • Query the information on a link whose type is "FC" and remote device ID is "0".
    admin:/>show remote_device link link_type=FC remote_device_id=0 
    ID Health Status Running Status Local Controller Remote Device Type In Remote Device Remote Device ID Remote Device WWN Remote Controller 
    -- ------------- -------------- ---------------- --------------------------- ---------------- ---------------- ----------------- ----------------- 
    0 Normal Link Up 0A Replication Yes 0 210030d17eb33e32 0A
  • Query the information on a link whose type is "FC" and ID is "0".
    admin:/>show remote_device link link_type=FC link_id=0 
    ID : 0 
    Health Status : Normal 
    Running Status : Link Up 
    Local Controller : 0A 
    Remote Device Type : Replication 
    In Remote Device : No 
    Remote Device ID : -- 
    Local Port ID : CTE0.A.H0 
    Local Port WWPN : 20803400a3e2690f 
    Remote Device Name : Huawei.Storage 
    Remote Device WWN : 210030d17eb33e32 
    Remote Controller : 0A 
    Remote Port ID : CTE0.A1.P0 
    Remote Port WWPN : 200830d17eb33e32 
    Bandwidth Limit Enabled : -- 
    Bandwidth Limit Size : -- 
    Bandwidth Utilization : -- 
    Fast Write Enable : Yes

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

ID of a link.

Health Status

Health status of a link.

Running Status

Running status of a link.

Local Controller

Local controller of the link.

Remote Device Type

Remote device type.

In Remote Device

Whether the link is added to the remote device.

Remote Device ID

Remote device ID.

Local Port ID

Local port ID.

Local Port WWPN

Local port WWPN.

Remote Device Name

Remote device name.

Remote Device WWN

Remote device WWN.

Remote Controller

Remote controller.

Remote Port ID

Remote port ID.

Remote Port WWPN

Remote port WWPN.

Bandwidth Limit Enabled

Whether the flow control on this link is enabled.

Bandwidth Limit Size

Flow control bandwidth.

Bandwidth Utilization

Utilization of flow control bandwidth.

Initiator Name

Name of the iSCSI initiator.

Target Name

Name of the iSCSI target.

Target IP

IP address of the iSCSI target.

Target Port

Port of the iSCSI target.

Recovery Policy

Recovery policy (iSCSI).

Fast Write Enable

Whether Fast Write is supported (Fibre Channel).

Chap Enabled

Indicates whether CHAP is enabled.

Chap User

CHAP user name.

Fast Write Enabled

Whether Fast Write is supported (iSCSI).

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 636154

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next