No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ms showio

ms showio

Function

The ms showio command is used to view the I/O count of background scanning tasks.

Format

ms showio

Parameters

None

Views

Diagnostic view

Usage Guidelines

None

Example

View the I/O count of background scanning tasks.

admin:/diagnose>ms showio 
Media scan io counter: 

Action Step Start      Back Good  Back Bad Date Err Not Back 
----------- ---------- ---------- ---------- ---------- ----------  
Scan Task         5778       5778          0          0          0 
Scan Disk        57750      57750          0       0          0 
Scan Dmp         57723      57723          0          0          0 

Upd Pool             1          1          0          0          0 
Upd Disk            20         20          0          0          0 
Upd Dmp             20         20          0          0          0 
admin:/diagnose>

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Action Step

Task step name.

Start

Task start count.

Back Good

Count of tasks that are successfully returned.

Back Bad

Count of tasks that fail to be returned.

Not Back

Count of tasks that are not returned.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 612831

Downloads: 242

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next