No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show statistics ftp_connection

show statistics ftp_connection


The show statistics ftp_connection command is used to query the FTP connection information.


show statistics ftp_connection [ controller=? ]






Indicates the controller ID.

The value is in the format of "XA", "XB", "XC", or "XD", where "X" indicates an integer from 0 to 3, for example, "0A" or "1C".


Developer view

Usage Guidelines

If this command is executed without parameters, this command is executed on the primary node.


Query the FTP connection information.

developer:/>show statistics ftp_connection controller=0A 
Client Ip     User Name Port  Connect Time(Sec)  
----------- --------- ----  ------------ ftp-user1 8932 3 ftp-user2 8765 10 ftp-user3 8623 15

System Response

The following table describes the parameter meanings.



Client Ip

Indicates the IP address used by the client to access the FTP.

User Name

Indicates the user name used by the client to access the FTP.


Indicates the port used by the client to access the FTP.

Connect Time(Sec)

Indicates the time duration when the client is connected.

Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 634186

Downloads: 254

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next