No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
drvist showconfid

drvist showconfid

Function

The drvist showconfid command is used to view the ID of a configurable negotiation parameter.

Format

drvist showconfid

Parameters

None

Views

Diagnostic view

Usage Guidelines

None

Example

query negotiate parameters that can be configured corresponding to ID.

admin:/diagnose>drvist showconfid 
HeaderDigest                : 0 
DataDigest:                 : 1 
MaxConnections:             : 2 
InitialR2T:                 : 3 
ImmediateData:              : 4 
MaxRecvDataSegmentLength: : 5 
MaxBurstLength:             : 6 
FirstBurstLength:           : 7 
DefaultTime2Wait:           : 8 
DefaultTime2Retain:         : 9 
MaxOutstandingR2T:          : 10 
DataPDUInOrder:             : 11 
DataSequenceInOrder:        : 12 
ErrorRecoveryLevel:         : 13 
OFMarker:                   : 14 
IFMarker:                   : 15 
OFMarkInt:                  : 16 
IFMarkInt:                  : 17 
queue depth per session: : 18 
nop timeout:                : 19 
login timeout:              : 20 
syn backlog:                : 21

System Response

The following table describes the parameter meanings.

Parameter

Meaning

HeaderDigest

Digest of header.

DataDigest

Digest of data.

MaxConnections

Number of max connections.

InitialR2T

Initial R2T.

MaxRecvDataSegmentLength

Max segment length of receiving data.

ImmediateData

Immediate Data.

MaxBurstLength

Max length of burst.

FirstBurstLength

Length of first burst.

DefaultTime2Wait

Default time to wait.

DefaultTime2Retain

Default time to retain.

MaxOutstandingR2T

Max outstanding R2T.

DataPDUInOrder

Data PDU in order.

DataSequenceInOrder

Data sequence in order.

ErrorRecoveryLevel

Level of error recovery.

OFMarker

OFMarker is used to turn on or off the initiator to target markers on the connection..

IFMarker

IFMarker is used to turn on or off the target

to initiator markers on the connection.

OFMarkInt

OFMarkInt is used to set the interval for the

initiator to target markers on the connection.

IFMarkInt

IFMarkInt is used to set the interval for the

target to initiator markers on the connection.

queue depth per session

Queue depth in one session.

nop timeout

Interval of nopin.

login timeout

Login expire time.

syn backlog

Syn backlog.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 617853

Downloads: 244

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next