No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show cache partition

show cache partition


The show cache partition command is used to query cache partition information.


show cache partition [ controller=? ]






Controller ID.

The value format is "XA", "XB", "XC", or "XD", where "X" is an integer ranging from 0 to 3, for example, "0A" or "1C".


Developer view

Usage Guidelines

Operations are executed on the local controller by default.


Query cache partition information about controller "0A".

developer:/>show cache partition controller=0A 

Pair ID  Partition ID  Local Volume Count  Mirror Volume Count  Local Stripe Count  Mirror Volume Count  Write Through  Write Hole Log Open 
0             0                 6                  4                     17                 17                    no              no 
65535 65535             0                  0                   0                  0               no              no 
65535 65535             0                  0                   0                  0           no              no 
65535 65535             0                  0                   0                  0                no              no 
65535 65535               0                  0                 0                0            no              no 
65535 65535             0                  0                0                  0                      no              no 
65535 65535             0                  0                0                 0              no              no 
65535 65535             0                  0                   0                  0              no              no 
65535 65535             0                  0                   0                  0                       no              no 

System Response

The following table describes the parameter meanings.



Pair ID

Controller pair ID.

Partition ID

Cache partition ID.

Local Volume Count

Count of local volume caches.

Mirror Volume Count

Count of mirror volume caches.

Local Stripe Count

Count of local stripe caches.

Mirror Stripe Count

Count of mirror stripe caches.

Write Through

Write through or not.

Write Hole Log Open

Write hole log enabled for the partition or not.

Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 636490

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next