No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show hyper_metro_consistency_group config

show hyper_metro_consistency_group config

Function

The show hyper_metro_consistency_group config command is used to view the memory information about a HyperMetro consistency group.

Format

show hyper_metro_consistency_group config consistency_group_id=?

Parameters

Parameter

Description

Value

consistency_group_id=?

ID of the HyperMetro consistency group.

Run the "show hyper_metro_consistency_group general" command without parameters to obtain the value.

Views

Developer view

Usage Guidelines

None

Example

View the memory information about the HyperMetro consistency group "3231333731308000".

developer:/>show hyper_metro_consistency_group config  consistency_group_id=3231333731308000 
Cg Used: TRUE 
Local Cg ID : 0 
Remote Cg ID : 0 
PairCopyDone : 0 
PairNumber : 2 
MngConStatus : 1 
LinkStatus : 1 
HealBit : 0 
LockInfo : 0xffff88025aacc168 
IsMaster : TRUE 
ID : 0x3231333731308000 
Domain ID : 0x200bc79fabc80100 
WorkMode : 1 
IsPriority : TRUE 
UpdateSpeed : 1 
RecoverPolicy : 1 
ArbId : 0X200bc79fabc80000 
ArbState : 1 
Health Status : 0 
ObjsType : 0 
Name : CG1 
Description : CG1 
Log CurCode : 255 
Log TranFlag : 0 
Log BlockFlag : 0

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Cg Used

Use flag of the HyperMetro consistency group.

Local Cg ID

Local ID of the HyperMetro consistency group.

Remote Cg ID

Remote ID of the HyperMetro consistency group.

PairCopyDone

Flag of pair copy completion of the HyperMetro consistency group.

PairNumber

Number of pairs.

MngConStatus

Management link status of the HyperMetro consistency group.

LinkStatus

Link status of the HyperMetro consistency group.

HealBit

Self-heal bit.

LockInfo

Lock information.

IsMaster

Flag of the primary or secondary device.

ID

ID of the HyperMetro consistency group.

Domain ID

ID of the HyperMetro domain.

WorkMode

Working mode.

IsPriority

Flag of the preferred site.

UpdateSpeed

Synchronization rate.

RecoverPolicy

Recovery policy.

ArbId

Arbitration ID.

ArbState

Arbitration status.

Health Status

Health status.

ObjsType

Object type.

Name

Name of the HyperMetro consistency group.

Description

Description.

Log CurCode

Code recoded in the log.

Log TranFlag

Log flag.

Log BlockFlag

Block flag.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 631562

Downloads: 252

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next