No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add disk_bom whitelist

add disk_bom whitelist


The add disk_bom whitelist command is used to add disk items to a BOM whitelist.


add disk_bom whitelist bom_list=? [ force=? ]






Disk item.

The value contains 1 to 16 disk items. The length of each disk item is eight bytes and disk items are separated by commas (,). Each disk item can contain digits and letters only.


Forced execution.

The value is "yes" or "no", where:

  • "yes": forced execution.
  • "no": unforced execution.


Developer view

Usage Guidelines

  • In the disk access process, do not run this command.
  • This command is invalid for disks that have connected to the system, and is valid for newly connected disks and reconnected disks (reinserted disk, reset disk, or reset system).
  • In the following conditions, a disk item cannot be added.
    • The disk item already exists in the BOM blacklist.
    • The disk item is added to the BOM whitelist.
    • The check status of the BOM list is off.
    • The BOM list is full.


Add disk items into a BOM whitelist.

developer:/>add disk_bom whitelist bom_list=0235G6BB,0235G6BC 
WARNING: You are about to add disk items to the BOM whitelist.This operation may change whether the disk whose item is specified can be connected to the system. 
Suggestion: Before performing this operation, confirm that the type of the BOM list to be set and the item are correct. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Add BOM 0235G6BB successfully. 
Add BOM 0235G6BC successfully. 

System Response


Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 631144

Downloads: 252

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next