No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show nfs connection

show nfs connection


The show nfs connection command is used to check the current connections from client of NFS server.


show nfs connection [ controller=? ]






Indicates the controller ID.

The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C".


Developer view

Usage Guidelines



Check the current connections from client of NFS server.

developer:/>show nfs connection controller=0A 
Local Address : 
Local Port      : 2049 
Remote Address  : 
Remote Port     : 670 
Receive Packets : 23 
Receive Bytes : 3116 
Send Packets : 23 
Send Bytes      : 3060 
Life            : 231 
Receive Queue : 0 
Send Queue      : 0 
Request Used : 0 
Request Queued  : 0 
Request Short : 0 
No Space        : 0 
Version         : 3

System Response

The following table describes the parameter meanings.



Local Address

Server address.

Local Port

Server port.

Remote Address

Client address.

Remote Port

Client port.

Receive Packets

Number of received packets.

Receive Bytes

Number of received bytes.

Send Packets

Number of sent packets.

Send Bytes

Number of sent bytes.


Link survival time.

Receive Queue

Size of receiving queue.

Send Queue

Size of sending queue.

Request Used

Number of allocated requests.

Request Queued

Number of queued requests.

Request Short

Insufficient requested resource count.

No Space

Full sending space count.


NFS version.

Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 631601

Downloads: 252

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next