No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
grain showNodeAlgInfo

grain showNodeAlgInfo


The grain showNodeAlgInfo command is used to view a node allocator.


grain showNodeAlgInfo file_system_id






File system ID.

To obtain the value, run the "show file_system general" command.


Diagnostic view

Usage Guidelines

This command is applicable only to the local controller.


View the node allocator of file system "0".

admin:/diagnose>grain showNodeAlgInfo 0 
remain block num         :0 
remain node num          :61 
total alloc node num     :1091 
block queue head         :0 
block queue tail         :0 
block queue num          :32 
node queue head          :189 
node queue tail          :128 
node queue num           :256

System Response

The following table describes the parameter meanings.



remain block num

Number of remaining blocks in the large block queue.

remain node num

Number of remaining blocks in the small block queue.

total alloc node num

Number of allocated nodes.

block queue head

Head of the large block queue.

block queue tail

Tail of the large block queue.

block queue num

Maximum number of blocks in the large block queue.

node queue head

Head of the node queue.

node queue tail

Tail of the node queue.

node queue num

Maximum number of nodes in the node queue.

Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 631310

Downloads: 252

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next