No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete quorum_server db

delete quorum_server db

Function

The delete quorum_server db command is used to forcibly delete the DB information about a specified quorum server.

Format

delete quorum_server db db_index=?

Parameters

Parameter

Description

Value

db_index=?

Indicates the DB index of a quorum server.

Export the CCDB and check the incorrect index.

Views

Developer view

Usage Guidelines

  • Do not use this command without R&D engineers' guidance. This command can only be used when the quorum server with incorrect DB information cannot be deleted on the CLI. Do not use this command in other scenarios.
  • Restart the system after running the commands.

Example

To delete the DB information about the quorum_ server whose DB index is 0, run the following command.

developer:/>delete quorum_server db db_index=0 
DANGER: You are about to forcibly maintain HyperMetro. This operation will cause the corresponding value-added pair to be unavailable. 
This operation enables you to forcibly delete the configuration information about a single item of HyperMetro if HyperMetro objects cannot be deleted properly. 
Suggestion: Before performing this operation, contract R&D engineers, perform all procedures under their guidance, and confirm the operation. 
1. The system is not configured by other users. 
2. Host I/Os of HyperMetro LUNs have been stopped. 
3. The parameter values that are entered are correct. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 634996

Downloads: 254

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next