No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show ral counter

show ral counter

Function

The show ral counter command is used to query the counts of module interface invoking by the RAL module.

Format

show ral counter

Parameters

None

Views

Developer view

Usage Guidelines

None

Example

Query the counts of module interface invoking by the RAL module.


  developer:/>show ral counter 
                         Phase|               Start |           Back Good |            Back Bad |            Not Back |      Latency | 
                 holdSpcObjset|                  56 |                  56 |                   0 |                   0 |            0 | 
                 releSpcObjset|                  56 |                  56 |                   0 |                   0 |            0 | 
               commitSpcHandle|             1710770 |             1710770 |                   0 |                   0 |            0 | 
              getSpcNextObject|                   0 |                   0 |                   0 |                   0 |            0 | 
                    holdSpcDmn|            21117484 |            21117484 |                   0 |                   0 |            0 | 
                    releSpcDmn|            21117550 |            21117550 |                   0 |                   0 |            0 | 
        addEntryToRecycleNoHdl|                   0 |                   0 |                   0 |                   0 |            0 | 
             addEntryToRecycle|                   0 |                   0 |                   0 |                   0 |            0 | 
                   claimSpcDmn|                   0 |                   0 |                   0 |                   0 |            0 | 
               releSpcClaimDmn|                   0 |                   0 |                   0 |                   0 |            0 | 
             readSpcRepDataSgl|                   0 |                   0 |                   0 |                   0 |            0 | 
      ALLOC_MULTI_[ZERO_]PAGES|                   0 |                   0 |                   0 |                   0 |            0 | 
            FREE_PAGES_AND_SGL|                   0 |                   0 |                   0 |                   0 |            0 | 
                writeSpcRepReq|                   0 |                 0 |                   0 |                   0 |            0 | 
                 openSpcLogObj|                   0 |                   0 |                   0 |                   0 |            0 | 
                closeSpcLogObj|                   0 |                   0 |                   0 |                   0 |            0 | 
                 lockSpcLogObj|                   0 |                   0 |                   0 |                   0 |            0 | 
               unlockSpcLogObj|                   0 |                   0 |                   0 |                   0 |            0 | 
                    readSpcLog|                   0 |                   0 |                   0 |                   0 |            0 | 
                  delSpcLogObj|                   0 |                   0 |                   0 |                   0 |            0 | 
            readSpcSnapObjData|                   0 |                   0 |                   0 |                   0 |          0 | 
                commitOpHandle|                   0 |                   0 |                   0 |                   0 |            0 | 
                cancelOpHandle|                   0 |                   0 |                   0 |                0 |            0 | 
         pushSpaceTxSpecifyNum|                   0 |                   0 |                   0 |                   0 |            0 | 
      prepareSpcQuotaRssSevice|                   0 |                   0 |                   0 |                   0 |            0 | 
          beginSpaceTxTransfer|                   0 |                   0 |                   0 |                   0 |            0 | 
            endSpaceTxTransfer|                   0 |                   0 |                   0 |                   0 |            0 | 
              listSpcLogMgrObj|                   0 |                   0 |                   0 |                   0 |            0 | 
                   createKvObj|                   0 |                   0 |                   0 |                   0 |            0 | 
                   removeKvObj|                   0 |                   0 |                   0 |                   0 |            0 | 
                     openKvObj|                   2 |                   0 |                   2 |                   0 |            0 | 
                    closeKvObj|                   0 |                   0 |                   0 |                   0 |            0 | 
              kvObjInsertItsem|                   0 |                   0 |                   0 |                   0 |            0 | 
               kvObjModifyItem|                   0 |                   0 |                   0 |                   0 |            0 | 
               kvObjSelectItem|                   0 |                   0 |                   0 |                   0 |            0 | 
               kvObjRemoveItem|                   0 |                   0 |                   0 |                   0 |            0 | 
        kvObjRemoveItemcomplex|                   0 |                   0 |                   0 |                   0 |            0 | 
             kvObjTraverseItem|                   0 |                   0 |                   0 |                   0 |            0 | 
                         TOTAL|            43945918 |            43945916 |                   2 |                   0 |            0 |

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Phase

Specifies the I/O type.

Start

Specifies the I/O start count.

Back Good

Specifies the count of I/Os that are correctly returned.

Back Bad

Specifies the count of I/Os that are incorrectly returned.

Not Back

Specifies the count of I/Os that are not returned.

Latency

Specifies the I/O latency.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 585759

Downloads: 233

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next