No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change file_system amend

change file_system amend

Function

The change file_system amend command is used to change the number of inodes in the file system.

Format

change file_system amend inode=? file_system_id=?

Parameters

Parameter

Description

Value

inode=?

Number of inodes in the file system.

The minimum value of the parameter is 0. To obtain the maximum value of the parameter, run the "stat -f --format='%c' ." command in the NFS share path.

file_system_id=?

File system ID.

-

Views

Developer view

Usage Guidelines

None

Example

Changing the number of inodes in file system 0 to 10.

developer:/>change file_system amend inode=10 file_system_id=0 
CAUTION:You are about to change the inode statistics of the file system. 
Suggestion: Before running this command, ensure that the file system has been unmounted from the host and there is no dirty data on the cache. 
Do you wish to continue?(y/n)y 
Command executed successfully. 
developer:/>

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 632857

Downloads: 252

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next