No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show identity_mapping cache

show identity_mapping cache

Function

The show identity_mapping cache command is used to check user mapping caches.

Format

show identity_mapping cache controller=? { username=? | uid=? } [ client_ip=? ]

Parameters

Parameter

Description

Value

controller=?

Controller ID.

The value format can be "XA", "XB", "XC" and "XD", where the value of X can be an integer ranging from 0 to 3. To obtain the value, run the show controller general command.

username=?

User name.

The value is a string containing 1 to 256 characters. The value cannot contain (/), ([]), (:), (;), (|), (=), (,), (+), (?), (<>), (@), (*), ("), and control characters. The last character cannot be (.).

uid=?

User ID.

The value is an integer from 0 to 18446744073709551615.

client_ip=?

Client IP address.

The value can be an IPv4 address or an IPv6 address.

Views

Developer view, vstore developer view

Usage Guidelines

None

Example

Check user mapping caches.

developer:/>show identity_mapping cache controller=0A username=unixuser 
Name               : unixuser  
Rule Id            : 0  
Uid                : 1000001 
Gid Number         : 2 
Gids               : 10001,10002 
Mapping Uid        : 2000001 
Mapping Gid Number : 2 
Mapping Gids       : 20001,20002 
Expired            : 180

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Name

User name.

Rule Id

User mapping rule ID.

Uid

User ID.

Gid Number

Number of user groups.

Gids

User group ID.

Mapping Uid

Mapping user ID.

Mapping Gid Number

Number of mapping user groups.

Mapping Gids

Mapping user group ID.

Expired

Remaining validity period of caches.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 579639

Downloads: 229

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next