No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create third_party_policy operation

create third_party_policy operation


The create third_party_policy operation command is used to create an operation set monitored by a third-party policy.


create third_party_policy operation policy_name=? protocol=? filter=?






Policy name.

The value contains 1 to 31 characters including only letters (case insensitive), digits, and underscores (_).


Protocol type.

The value is "nfsv3", which is case insensitive. This field must be used with the filter field.


Operation set.

This field must be used with the protocol field. The value is "all", which is case insensitive.


Developer view, vstore developer view

Usage Guidelines

Parameters "policy_name=?", "protocol=?", and "filter=?" are mandatory.


  • Create a third-party policy.
    developer:/>create third_party_policy operation policy_name=test protocol=nfsv3 filter=all  
    Command executed successfully.
  • Query creation results.
    developer:/>show third_party_policy operation policy_name=test 
    Policy ID: 1 
    Policy Name: test 
    Protocol: nfsv3 
    Filter: nfsv3:all

System Response


Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 638651

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next