No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
cache show label

cache show label

Function

The cache show label command is used to view label information about each code branch.

Format

cache show label

Parameters

None

Views

Diagnostic view

Usage Guidelines

None

Example

View label information about each code branch.

admin:/diagnose>cache show label 
Label Count  
----- -----  
DBG_LABEL_ASYN_PREFETCH_E 130  
READ_DEVICE_FAIL 76  
READ_BYTE_CACHE_FAIL 4  
VOLUME_READ_SPLIT_PREFETCH 26  
VOLUME_READ_SPLIT_ASYNC_PREFETCH 130  
READ_ADJUST_PREFETCH_LBA 244  
START_MIRROR_DELETE 5088  
MIRROR_DELETE_DONE 5088  
PTT_TRIGGER 506724  
PTT_TRIGGER_PTT_NOT_CREATE 4053976 
POOL_TRIGGER_BY_TIMER 506726  
POOL_TRIGGER_NORMAL 125  
POOL_TRIGGER_DESTAGE_TIMEOVER 1  
POOL_TRIGGER_DESTAGE_TASKOVER 124  
POOL_TRIGGER_DESTAGE_POOL_OVER_CONCUR 12 
DESTAGE_WORKER_CREATE 129  
DESTAGE_WORKER_REUSE 8760  
DESTAGE_WORKER_RECYCLE 8889  
POOL_CSW_TRIGGER 174  
POOL_CSW_TRIGGER_WORKER_NO_CONCUR_POOL 1 
POOL_CSW_TRIGGER_NO_WORKER 122  
POOL_CSW_TRIGGER_NO_CHUNK_LIST 1  
POOL_CSW_TRIGGER_LOOP 64  
POOL_CSW_TRIGGER_NONE_CHUNK_IN_CKG 5  
POOL_CSW_TRIGGER_SELECT_LEVEL_HIGH 89  
POOL_CSW_TRIGGER_SELECT_LEVEL_LOW 80  
POOL_CSW_TRIGGER_SUCCESS 51  
POOL_CSW_TRIGGER_SKIP_META_1 346651  
INST_TO_POOL_CSW_WHEN_STOP_DSG 72  
INSERT_TO_POOL_CSW_PROMOTE 43  
INST_TO_POOL_LRU_WHEN_STOP_DSG 1134  
POOL_WT_TRIGGER 2011 
POOL_WT_TRIGGER_META 2011  
POOL_WT_TRIGGER_DATA 2011  
POOL_WT_TRIGGER_NO_CHUNK_LIST 3800  
POOL_WT_TRIGGER_SUCCESS 5037  
INSERT_TO_POOL_WT_CALL 5070  
INST_TO_POOL_WT_RMV_CK_FRM_OLD 98  
INSERT_TO_POOL_WT 5037  
SELECT_FROM_POOL_WT 5037  
SEND_MIRROR_DELETE 5088  
MIRROR_DELETE_RESPONSE 5088  
MIRROR_DELETE_NO_CHUNK_IN_LIST_V 1013637  
MIRROR_DELETE_NO_CHUNK_IN_LIST_S 1013639  
MIRROR_DELETE_THREAD_NONEED_ACTIVE 1013641 
PEER_RECV_MIRROR_DELETE_REQUEST 48  
PEER_SEND_MIRROR_DELETE_RESPONSE 48  
DBG_LABEL_XRB_SEND_MSG 5174  
DBG_LABEL_XRB_SEND_SGL 178  
DBG_LABEL_XRB_SEND_DATA 39742448  
HANG_POSS_TIMEPROC_ENTER 1993261  
STRIPE_CACHE_DSG_EVENT 7936  
STRIPE_CACHE_DSG_MATCH_WRITE 2730  
FS_DSG_ASSEMBLE_SWITCH_BONUS 28

System Response

The following table describes the parameter meanings.

Parameter

Meaning

label

Branch label.

count

Branch count.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 638017

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next