No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
rephv logzone show

rephv logzone show

Function

The rephv logzone show command is used to query the HyperVault log information about the current controller.

Format

rephv logzone show [ localDbKey ]

Parameters

Parameter

Description

Value

localDbKey

KEY of the HyperVault object stored in the DB.

To obtain the value, run the "rephv vault show" command without parameters.

Views

Diagnostic view

Usage Guidelines

The command is run on the local controller by default.

Example

Query the HyperVault log information.

admin:/diagnose>rephv logzone show 
localDbKey     logId  logKey     flag     opcode 
100           26464646     100         0         5 


System Response

The following table describes the parameter meanings.

Parameter

Meaning

localDbKey

KEY of the HyperVault object stored in the DB.

logId

Log ID.

logKey

ID of the object to which the log belongs.

flag

Valid information flag in the log.

opcode

Log operation code.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 614748

Downloads: 244

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next