No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
drvist showconfig

drvist showconfig

Function

The drvist showconfig command is used to view all the configuration information of the Internet Small Computer Systems Interface (iSCSI) target.

Format

drvist showconfig

Parameters

None

Views

Diagnostic view

Usage Guidelines

None

Example

View all the configuration information of the iSCSI target.

admin:/diagnose>drvist showconfig 
*********config in file********* 
-------------------------- 
MaxPortNum          : 50 
MaxSessNumPerPort:  : 128 
MaxCmdNumPerPort: : 1500 
MaxChapIniNum:      : 1024 
ExtUnSolbufSupport  : 0 
MaxUnsolbufLength : 134217728 
AdjustbufSupport : 0 
MaxSendbufLength : 52428800 
MaxRecvbufLength : 10485760 
*********config setby user ********* 
-------------------------- 
queue depth per session: : 128 
nop timeout:                : 15 
login timeout:              : 10 
syn backlog:                : 8 
********* nego parameter ********* 
-------------------------- 
HeaderDigest              : 1 
DataDigest                : 1 
MaxConnections            : 1 
InitialR2T                : 1 
ImmediateData             : 1 
MaxRecvDataSegmentLength  : 8192 
MaxBurstLength            : 262144 
FirstBurstLength          : 4096 
DefaultTime2Wait          : 2 
DefaultTime2Retain        : 20 
MaxOutstandingR2T         : 1 
DataPDUInOrder            : 1 
DataSequenceInOrder       : 1 
ErrorRecoveryLevel        : 0 
OFMarker                  : 0 
IFMarker                  : 0 
OFMarkInt                 : 2048 
IFMarkInt                 : 2048

System Response

The following table describes the parameter meanings.

Parameter

Meaning

config in file

Configuration item in a file.

config setby user

User-defined configuration item.

nego parameter

Negotiation parameter of the iSCSI target.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 578129

Downloads: 229

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next