No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mr showflowcnt

mr showflowcnt


The mr showflowcnt command is used to view the count of metadata backup processes in a disk domain.


mr showflowcnt -p poolId






Disk domain ID.

The value ranges from 0 to n minus one, where n indicates the maximum number of disk domains supported by a product.


Diagnostic view

Usage Guidelines



View the count of metadata backup processes in disk domain 0.

admin:/diagnose>mr showflowcnt -p 0 
  Exec Time            Flow ID  Flow Type            Run Count  Fail Count  Run Result 
  -------------------  -------  -------------------  ---------  ----------  ---------- 

  0000-00-00 00:00:00  0        init pool            0          0           success 
  0000-00-00 00:00:00  1        init vol             0          0           success 
  2015-07-01 18:32:10  2        recover pool         1          0           success 
  2015-07-07 09:45:55  3        recover vol          3          0           success 
  0000-00-00 00:00:00  4        set vol del          0          0           success

System Response

The following table describes the parameter meanings.



Exec Time

Execution time.

Flow ID

Process ID.

Flow Type

Process type.

Run Count

Count of ongoing processes.

Fail Count

Count of failed processes.

Run Result


Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 635322

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next