No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
rtt show

rtt show

Function

The rtt show command is used to view the statistics information of a statistical item.

Format

rtt show -t type

Parameters

Parameter

Description

Value

type

Type of a statistical item.

The value can be all or aspecific trace ID.

all: indicates all statisticalitems.

A specific trace ID: views the I/O request response time statistics of the module with a specific trace ID.

Views

Diagnostic view

Usage Guidelines

None

Example

View the statistics information of statistical item 211.

admin:/diagnose>rtt show -t 211 
Name                                 tid        open       Av         Max        Min  Beg        End        Total 
----------                           ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- 
BTREE_READ_NODE                             211          0          0          0          0       0          0          0

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Name

Type of the statistical item.

tid

ID of the statistical item.

open

Whether to enable the statistics function.

Av

Average time consumption.

Max

Maximum time consumption.

Min

Minimum time consumption.

Beg

Number of REQs when the statistical item starts.

End

Number of REQs when the statistical item ends.

Total

Total time consumption.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 635389

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next