No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
bgr showevent

bgr showevent

Function

The bgr showevent command is used to view I/O events of the BGR module.

Format

bgr showevent

Parameters

None

Views

Diagnostic view

Usage Guidelines

If the BGR module is abnormal, you can run this command to view I/O events of the BGR module.

Example

View I/O events of the BGR module.

admin:/diagnose>bgr showevent 
 Seq Operation        Time                Id         Type SrcLunId      DstLunId         SrcResult       DstResult 
 --- ---------------- ------------------- ---------- ---- ---------------- ---------------- --------------- ---------------

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Seq

Serial number of the I/O event.

Operation

Operation that causes the I/O event.

Time

Time when the I/O event occurs.

Id

Pair ID.

Type

Pair type.

SrcLunId

Source LUN ID.

DstLunId

Target LUN ID.

SrcResult

Value returned for the read/write I/O of the source LUN.

DstResult

Value returned for the read/write I/O of the target LUN.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 634800

Downloads: 254

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next