No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove system maintenance_ip

remove system maintenance_ip


The remove system maintenance_ip command is used to remove the IP properties of maintenance network ports.


remove system maintenance_ip eth_port_id=?






ID of the maintenance port whose IP address configurations you want to delete.

To obtain the value, run "show port general".


Developer view

Usage Guidelines

OceanStor 5500 V5 Elite/5110 V5/5300 V5 storage systems support this command.


Delete the IPv4 address of maintenance port "CTE0.A.H5". The port ID varies depending on product models.

developer:/>remove system maintenance_ip eth_port_id=CTE0.A.H5 
DANGER: You are about to delete the IP address configurations of the maintenance port. This operation will make users unable to log in to the storage system using the maintenance port. 
Suggestion: Before performing this operation, ensure that the IP address configurations of the maintenance port need to be deleted. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 637952

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next