No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mp show speclun

mp show speclun

Function

The mp show speclun command is used to query a specified heterogeneous remote LUN.

Format

mp show speclun sdid=?

Parameters

Parameter

Description

Value

sdid=?

ID of a SCSI device.

To obtain the value, run the "mp show lun" command.

Views

Diagnostic view

Usage Guidelines

None

Example

Query heterogeneous remote LUN "76".

admin:/diagnose>mp show speclun sdid=76 
ID : 76 
UUID : 60022a11000eaa2a015d38a700000001 
Vendor ID : HUAWEI 
Product ID : S2600T 
Path Selector : round-robin 
Default Tpg ID : 2 
Current Tpg ID : 2 
Failover Tag : NOT FAILOVER 
Failback Times : 1 
Status : RDY 
Reference Count : 3

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

ID of a SCSI device.

UUID

UUID.

Vendor ID

Vendor ID of the heterogeneous remote LUN.

Product ID

Product ID of the heterogeneous remote LUN.

Path Selector

Path selection algorithm for accessing the heterogeneous remote LUN.

Default Tpg ID

ID of the default target port group.

Current Tpg ID

ID of the current target port group.

Failover Tag

Status of the working controller failover of the heterogeneous remote LUN.

Failback Times

Times of the working controller failback of the heterogeneous remote LUN.

Status

Status of the heterogeneous remote LUN.

Reference Count

Reference count.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 585777

Downloads: 233

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next