No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
iod show queue pricnt

iod show queue pricnt

Function

The iod show queue pricnt command is used to query the number of current requests in each priority queue for each thread.

Format

iod show queue pricnt

Parameters

None

Views

Diagnostic view

Usage Guidelines

None

Example

Query the number of current requests in each priority queue for each thread.

admin:/diagnose>iod show queue pricnt 
ThreadId highCmd     lowCmd         startQ0            startQ1            startQ2            startQ3            startQ4            startQ5            startQ6            startQ7            Done 
       0          0          0          0/0                0/0                0/0                0/0                0/0                0/0                0/0             0/0                0/0       
       1          0          0          0/0                0/0                0/0                0/0                0/0                0/0                0/0                0/0                0/0       
       2          0          0          0/0                0/0                0/0                0/0                0/0                0/0                0/0                0/0                0/0       
       3          0          0          0/0                0/0                0/0                0/0                0/0                0/0                0/0                0/0                0/0       
 Total          0          0          0/0                0/0                0/0                0/0                0/0                0/0                0/0                0/0                0/0      

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ThreadId

Thread ID.

highCmd

High-priority CMD.

lowCmd

Low-priority CMD.

startQ0

Start priority 0 queue.

startQ1

Start priority 1 queue.

startQ2

Start priority 2 queue.

startQ3

Start priority 3 queue.

startQ4

Start priority 4 queue.

startQ5

Start priority 5 queue.

startQ6

Start priority 6 queue.

startQ7

Start priority 7 queue.

Done

Done priority queue.

Total

Total number of requests.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 591469

Downloads: 233

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next