No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
drvisi showremottgtinfo

drvisi showremottgtinfo


The drvisi showremottgtinfo command is used to show information about the remote target.


drvisi showremottgtinfo




Diagnostic view

Usage Guidelines



show remote target information.

admin:/diagnose>drvisi showremottgtinfo 
TargetID is :0 
Targetip is : 
Target TCPPORT is :3260 
Target LocalPort is :0x20301 
Target WanttedConn is :1 
Target ActiveNow is :0 
Target ChapType is :0 
Target Recovermod is :1 
Target IsThirdParty is :0 
Session IniName is 
Session TgtName is 
Session pg_tag is :779 
Session isid is :80 12 34 56 78 9a 
Remote Target Link State is :1 : 0 is down; 1 is up ;other is not normal 
Congestion algorithm is : cubic

System Response

The following table describes the parameter meanings.




target ID.


Target IP address.


Target TCP Port.

Target LocalPort

Target Local Port.

Target WanttedConn

Whether the target device needs to be connected.

Target ActiveNow

Whether CHAP authentication is effective immediately.

Target ChapType

CHAP authentication type.

Target Recovermod

Link recovery mode.

Target IsThirdParty

Whether a third-party remote target.

Session IniName

Session initiator name.

Session TgtName

Session target name.

Session pg_tag

Session pg_tag.

Session isid

Session ISID.

Remote Target Link State

Link status of the target.

Congestion algorithm

Congestion algorithm.

Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 634454

Downloads: 254

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next