No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
sys showlog

sys showlog

Function

The sys showlog command is used to view recent important logs of the system control.

Format

sys showlog { -a | -e | -w | -i }

Parameters

Parameter

Description

Value

-a

Shows all the recent logs of the system control.

-

-e

Shows all the error logs of the system control.

-

-w

Shows all the warning logs of the system control.

-

-i

Shows all the info logs of the system control.

-

Views

Diagnostic view

Usage Guidelines

Run this command in debug mode in developer view.

Example

Showing recent important logs of the system control.

admin:/diagnose>sys showlog -a 
[0][2015-07-08 02:51:56][4] CLM: Max msg num is (16640). 
[0][2015-07-08 02:51:56][4] CLM: Master version is 0 
[0][2015-07-08 02:51:56][4] CLM: Max LUN num is (4096), max Pool Num is (32). 
[0][2015-07-08 02:52:08][4] LINK_CHECK: Receive link event(event id 35, src nid 0, dst nid 1). 
[0][2015-07-08 02:52:08][4] LINK_CHECK: Receive link event(event id 33, src nid 0, dst nid 1). 
[0][2015-07-08 02:52:47][4] CLS_STATUS: normal 0x0, standby 0x3, fault 0x0, offline 0x0, master 0. 
[0][2015-07-08 02:52:47][4] CLM: Master version is 1 
[0][2015-07-08 02:52:49][4] CLM: Start to reclaim master(ver 0) resource. 
[0][2015-07-08 02:55:59][4] CLS_STATUS: normal 0x3, standby 0x0, fault 0x0, offline 0x0, master 0.

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 636643

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next