No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mcachelayer queryext

mcachelayer queryext


The mcachelayer queryext command is used to view extent information in metadata caches and space allocation.


mcachelayer queryext -p pool id -l lun id -e extent id -t volume type





pool id

Disk domain ID.

The value ranges from 0 to n minus one. n indicates the maximum number of disk domain.

lun id


The value ranges from 0 to n minus one. n indicates the maximum number of LUNs.

extent id

Extent ID.


volume type

Volume type.

The value can be 0 or nonzero number, where:

  • data

non-zero number: meta.


Diagnostic view

Usage Guidelines



View extent information in metadata caches and space allocation.

admin:/diagnose>mcachelayer queryext -p 0 -l 0 -e 0x40000001 -t 1 
Extent info in mcache: 
Query extent info in mcache failed.Begin query in spa. 
Extent info in spa: 
Extent ID : 0x40000001 
Ckg ID : 0x4000 
Ckg Offset : 1 
Init Flag : 1 (0:init not finished 1: init finished) 
Zone Index : 0 
Migrate Flag : 0 (0:not migrate 1:migrate)

System Response


Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 640649

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next