No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show remote_replication feature_pair

show remote_replication feature_pair

Function

The show remote_replication feature_pair command is used to show the feature information about a remote replication.

Format

show remote_replication feature_pair pair_id=? [ controller=? ]

Parameters

Parameter

Description

Value

pair_id=?

Remote replication ID.

To obtain the value, run "show remote_replication unified".

controller=?

ID of the controller.

The value is in the format of XA or XB. X is an integer ranging from 0 to the value of the number of controller pairs minus 1.

Views

Developer view

Usage Guidelines

None

Example

To show the feature information about remote replication "9017acaf20050000", run the following command:

developer:/>show remote_replication feature_pair pair_id=9017acaf20050000 controller=0A 
Local Pair ID : 0 
User Type : 1 
Pair State : Normal 
Start Synchronize Status : Init 
Pair Mode : Async 
Is Data Consistent : 0 
Remote Cluster ID : 0 
Remote ID : 0 
Service ID : 0 
Role : Slave 
Task SN : 34 
Start Time : 2215537472054308 
End Time : 2215537472054313 
Manage Link Status : 1 
Service Flag : 3 
Is Compress Effect : 0 
Is Compress Enabled : 0 
Valid Flag : 0 
Log ID : -- 
Current Opcode : 4294967295 
DB Log Opcode : 4294967295 
Transaction State : 3 
Old States : Butt 
Expect Role : Butt 
Timer ID : 4294967295 
Self Heal Time : 104 
Verify Start Time : -- 
Modify Timer Flag : 255 
Can Synchronize Continue : 1 
Is Immediate Start : 0 
Synchronize Retry Cause : 4294967295 
Local Role : Slave 
Local Type : 40 
Local Read Write Property : No access 
Local Resource ID : 0 
Local Data State : 2 
Remote Role : Master 
Remote Type : 40 
Remote Read Write Property : Read write 
Remote Resource ID : 0 
Remote Data State : 2

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Local Pair ID

Local ID.

User Type

User type.

Pair State

Operating status of a remote replication pair.

Start Synchronize Status

Preparation status of synchronization start.

Pair Mode

Remote replication mode, synchronous or asynchronous.

Is Data Consistent

Whether data is consistent.

Remote Cluster ID

ID of the remote disk array.

Remote ID

Remote ID.

Service ID

Service ID.

Role

Role.

Task SN

Task SN.

Start Time

Time when synchronization starts.

End Time

Time when synchronization ends.

Manage Link Status

Management link status.

Service Flag

Flag of service start.

Is Compress Effect

Whether compression has taken effect.

Is Compress Enabled

Compression switch.

Valid Flag

Log validity flag.

Log ID

Log ID.

Current Opcode

Current operation code.

DB Log Opcode

Operation code in DBLog.

Transaction State

The state of transaction.

Expect Role

The expect role.

Old States

The old status of a remote replication.

Timer ID

Timer ID.

Self Heal Time

Self-healing duration.

Verify Start Time

Timer modification time.

Modify Timer Flag

Timer modification flag.

Can Synchronize Continue

Resumable data transfer or not.

Is Immediate Start

Whether synchronization starts immediately.

Synchronize Retry Cause

Cause of synchronization start retry.

Local Role

Local role, primary or secondary.

Local Type

Local type.

Local Read Write Property

Local read and write property.

Local Resource ID

Local resource ID.

Local Data State

Local data status.

Remote Role

Remote role.

Remote Type

Remote type.

Remote Read Write Property

Remote read and write property.

Remote Resource ID

Remote resource ID.

Remote Data State

Remote data status.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 585379

Downloads: 233

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next