No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show ndmp stat

show ndmp stat

Function

The show ndmp stat command is used to view the status of the NDMP service.

Format

show ndmp stat

Parameters

None

Views

Developer view

Usage Guidelines

This command cannot be executed on the CLI to which you log in using the management IP address of the SVP. Before executing this command, use the management IP address to log in to the desired controller.

Example

View the status of the NDMP service.

developer:/>show ndmp stat 
================================== Common Information ============================= 
/mnt/OstorVFS Directory Is Exist : yes 
/mnt/OstorVFS/fsX Count : 8192 
================================== Mount Point ==================================== 
Type Path 
--------- ---------------------  
tmpfs /mnt/OstorVFS 
OstorVFS /mnt/OstorVFS/fs1 
OstorVFS /mnt/OstorVFS/fs0 
================================== ISCSI Device List ============================== 
[4:0:0:0] disk ATA RTMMA064JHV4EWY A11 /dev/sda  
[5:0:0:0] disk ATA RTMMA064JHV4EWY A11 /dev/sdb  
[7:0:1:0] mediumx ADIC Scalar i2000 100A /dev/sch0 
[7:0:1:1] tape IBM ULTRIUM-TD5 A3K6 /dev/st0  
[7:0:1:2] tape IBM ULTRIUM-TD5 A3K6 /dev/st1  
[7:0:1:3] tape IBM ULTRIUM-TD5 A3K6 /dev/st2  
[7:0:1:4] tape IBM ULTRIUM-TD5 A3K6 /dev/st3  
[7:0:1:5] tape IBM ULTRIUM-TD5 A3K6 /dev/st4  
[7:0:1:6] tape IBM ULTRIUM-TD5 A3K6 /dev/st5  
[7:0:1:7] tape IBM ULTRIUM-TD5 A3K6 /dev/st6  
[7:0:1:8] tape IBM ULTRIUM-TD5 A3K6 /dev/st7  
[7:0:1:9] tape IBM ULTRIUM-TD5 A3K6 /dev/st8  
[7:0:1:10] tape IBM ULTRIUM-TD5 A3K6 /dev/st9  
[7:0:1:11] tape IBM ULTRIUM-TD5 A3K6 /dev/st10 
[7:0:1:12] tape IBM ULTRIUM-TD5 A3K6 /dev/st11 
[8:0:0:0] enclosu PMCSIERA SXP 36x12G RevB - 

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Type

File system type.

Path

File system path.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 590438

Downloads: 233

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next