No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change slow_system_disk monitor_parameter

change slow_system_disk monitor_parameter


The change slow_system_disk monitor_parameter command is used to set the slow system disk check parameters.


change slow_system_disk monitor_parameter interval=? serve_time=? check_period=? slow_period=?






Routine check interval.

The value cannot be smaller than 10 minutes or greater than 43200 minutes.


SVCTM threshold.

The value cannot be smaller than 1ms or greater than 30000ms.


Number of latest routine check periods.

The value cannot be smaller than 1 or greater than 100.


Threshold of slow periods in a specific period. If the number of slow periods reaches the threshold, a system disk is considered as a slow system disk.

The value cannot be smaller than 1 or greater than the number of recent routine test periods.


Developer view

Usage Guidelines

OceanStor 5110 V5 storage systems supports this command.


Set the routine check interval to 30 minutes, the SVCTM threshold to 100ms, the numbers of latest routine check periods to 48, and the threshold of slow periods to 42.

developer:/>change slow_system_disk monitor_parameter interval=30 serve_time=100 check_period=48 slow_period=42 
CAUTION:You are about to change the slow system disk check parameters. This operation will affect the criterion of slow system disks. 
Suggestion: Before performing this operation, ensure that the slow system disk check parameters need to be changed. 
Do you wish to continue?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 635098

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next