No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
pmgr showPoolInfo

pmgr showPoolInfo

Function

The pmgr showPoolInfo command is used to query detailed information about a specified disk domain.

Format

pmgr showPoolInfo -p poolId

Parameters

Parameter

Description

Value

-p poolId

ID of the disk domain.

To obtain the value, run the "show disk_domain general" command.

Views

Diagnostic view

Usage Guidelines

None

Example

Query detailed information about specified disk domain "0".

admin:/diagnose>pmgr showPoolInfo -p 0 

 poolid | Isworknode | diskNum  | backGround |service | IsOnLine | IsHang | Runningstatus | Healthstatus | IsMetaRepair  
 0        NO           6          ON          OFF         YES          NO         ONLINE          NORMAL       OFF         


 diskId | disk_Status | isReconFinish | isReconNoSpace | isSoftReconSuccess | timerId | tier_type | dgId | subDgId  
 514      DISK_NORMAL NO              NO               NO                   0x0       TYPE_SAS 0x4020     0x0      
 515      DISK_NORMAL NO              NO               NO                   0x0       TYPE_SAS 0x4020     0x1        
 517      DISK_NORMAL NO              NO               NO                   0x0       TYPE_SAS 0x4020     0x0        
 519      DISK_NORMAL NO              NO               NO                   0x0       TYPE_SAS 0x4020     0x1        
 520      DISK_NORMAL NO              NO               NO                   0x0       TYPE_SAS 0x4020     0x0        
 522      DISK_NORMAL NO              NO               NO                   0x0       TYPE_SAS 0x4020     0x1        


 zoneId | healthStatus | runningStatus  
 0x400b     NORMAL         ONLINE         
 0x401f     NORMAL         ONLINE         


 poolid | tier_type | Runningstatus | Healthstatus | diskNum  
 0        TYPE_SSD ONLINE          NORMAL         --        

 poolid | tier_type | Runningstatus | Healthstatus | diskNum  
 0        TYPE_SAS ONLINE          NORMAL         --        

 poolid | tier_type | Runningstatus | Healthstatus | diskNum  
 0        TYPE_SATA ONLINE          NORMAL         --        

 poolId | tier_type | dgId  
 0        TYPE_SAS 0x4020      

 There is no task in task list. 

admin:/diagnose>

System Response

The following table describes the parameter meanings.

Parameter

Meaning

poolid

Disk domain ID.

Isworknode

Whether the local controller is the working controller.

diskNum

Number of disks in the disk domain.

backGround

Whether the background task is started in the disk domain.

service

Whether the background service is started in the disk domain.

IsOnLine

Whether the disk domain is online.

IsHang

Whether the disk domain is suspended.

Runningstatus

Operating status of the disk domain.

Healthstatus

Health status of the disk domain.

IsMetaRepair

Whether metadata recovery is being implemented for the disk domain.

diskId

Disk ID.

disk_Status

Disk status.

isReconFinish

Whether disk reconstruction is complete.

isReconNoSpace

Whether hotspare space exists during disk reconstruction.

isSoftReconSuccess

Whether soft reconstruction is successful.

timerId

ID of the task timer during reconstruction.

tier_type

Tier type.

dgId

Disk group ID.

subDgId

Disk subgroup ID.

healthStatus

Health status.

runningStatus

Operating status.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 634325

Downloads: 254

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next