No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change cifs keep_alive_switch

change cifs keep_alive_switch

Function

The change cifs keep_alive_switch command is used to modify the inactive TCP connection detection function of CIFS.

Format

change cifs keep_alive_switch status=? controller=?

Parameters

Parameter

Description

Value

status=?

Status of the switch.

The value is in the format of "enable" or "disable", where the "enable" is switch on and "disable" is switch off.

controller=?

Indicates the controller ID.

The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C".

Views

Developer view

Usage Guidelines

None

Example

Modify the inactive TCP connection detection function of CIFS.

developer:/>change cifs keep_alive_switch status=enable controller=0A 
Command executed successfully. 

developer:/>change cifs keep_alive_switch status=disable controller=0A 
WARNING: You are about to disable the inactive TCP connection detection function of CIFS. This operation will cause the CIFS service to fail to check the network exceptions and the abnormal network connection cannot be released. 
Suggestion: Disable the function with caution. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 613057

Downloads: 242

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next