No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change dha policy

change dha policy

Function

The change dha policy command is used to set a scheduling policy for disk health analysis(DHA).

Format

change dha policy { collect_start_time=? | collect_cpu_userate=? | collect_mem_userate=? | export_mem_userate=? | file_space=? | alarm_status=? | alarm_threshold=? | log_status=? | export_score=? } *

Parameters

Parameter

Description

Value

collect_start_time=?

Collection start time.

The value is in the format of hour:minute:second and ranges from 00:00:00 to 23:59:59.

collect_cpu_userate=?

Upper limit of CPU usage during collection.

The value ranges from 1 to 90, expressed in percentage.

collect_mem_userate=?

Upper limit of memory usage during collection.

The value ranges from 1 to 90, expressed in percentage.

export_mem_userate=?

Upper limit of memory usage during data export.

The value ranges from 1 to 100, expressed in percentage.

file_space=?

Maximum space occupied by collected logs.

The value ranges from 100 to 450, expressed in MB.

alarm_status=?

Default alarm status.

The value can be "on" or "off", the details are as follows:

  • "on": The alarm function is enabled.
  • "off": The alarm function is disabled.

alarm_threshold=?

Alarm threshold.

The value ranges from 10 to 70.

log_status=?

Whether to resolve information about log page 15 for SAS or Fibre Channel disks.

The value can be "on" or "off", the details are as follows:

  • "on": Resolves information about log page 15 for SAS or Fibre Channel disk.
  • "off": Does not resolve information about log page 15 for SAS or Fibre Channel disk.

export_score=?

Enables or disables score exporting.

The value can be "on" or "off", the details are as follows:

  • "on": Enables score exporting.
  • "off": Disables score exporting.

Views

Developer view

Usage Guidelines

None

Example

Set the alarm status of the DHA scheduling policy to off.

developer:/>change dha policy alarm_status=off 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 613444

Downloads: 242

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next