No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change system interrupt_coalesce

change system interrupt_coalesce


The change system interrupt_coalesce command is used to modify the interrupt coalesce attributes of all Smart IO modules running in FC mode in the system.


change system interrupt_coalesce time=? count=?






Sets the time when interrupts are coalesced.

The time can be 0 us, 10 us, 82 us, 327 us, 655 us, 1310 us, or default. For the 1821 card, the default value is 82 us, and for the 1822 card, the default value is 0 us.


Sets the count of coalesced interrupts.

The value can be: 0, 8, 16, 32, 64, 128, and default. The default value is 0 for the 1821 and 1822 cards.


Engineer view

Usage Guidelines

After the setting, power off and on all Smart IO modules running in FC mode.


Change the interrupt coalesce time to "82 us" and the count of coalesced interrupts to "8".

developer:/>change system interrupt_coalesce time=82us count=8 
DANGER: You are about to modify the interrupt coalesce parameters of the Smart IO module running in FC mode. This operation may affect the IOPS and CPU performance. After the setting, power off and on all Smart IO modules running in FC mode.  
Suggestion: Before performing this operation, confirm that you need to modify the interrupt coalesce parameters. 
Have you read danger alert messages carefully?(y/n)y 
Are you sure you really want to perform the operation(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 634763

Downloads: 254

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next