No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mrr rlunshowflow

mrr rlunshowflow

Function

The mrr rlunshowflow command is used to view the execution information of a specific process.

Format

mrr rlunshowflow -p poolId -l lunId

Parameters

Parameter

Description

Value

poolId

ID of a disk domain.

The value ranges from 0 to n

minus one, where n indicates

the maximum number of disk

domains supported by a

product.

lunId

LUN ID.

The value ranges from 0 to n

minus one, where n indicates

the maximum number of

LUNs supported by a

product.

Views

Diagnostic view

Usage Guidelines

None

Example

View information about the metadata repair process of LUN 0.

admin:/diagnose>mrr rlunshowflow -p 0 -l 0 
 Step Step Name                 Start Time(s)         End Time(s)           Used Time(s)  State  Proc  CurOpt     Repair Type       Result  ErrCode 
 -----  ------------------------  --------------------  --------------------  ------------  -----  ----  ---------  ----------------  ------  ---------- 
 1      Prepare repair            2015-07-07 09:45:53 2015-07-07 09:45:53 0             0(1 )  1/8 0          --                SUCC 0x0          
 2      Backup root extent        2015-07-07 09:45:53 2015-07-07 09:45:55 2             1(1 )  2/8 0          --                SUCC 0x0          
 3      Judge method              2015-07-07 09:45:55 2015-07-07 09:45:55 0             1(1 )  3/8 0          --                SUCC 0x0          
 4      Repair extent info        2015-07-07 09:45:55 2015-07-07 09:45:55 0             2(0 )  4/8 0          EXTTREE Repair SUCC 0x0          
 5      Repair strip              2015-07-07 09:45:55 2015-07-07 09:45:55 0             2(0 )  7/8 0          --                SUCC 0x0          
 6      Finishing repair          2015-07-07 09:45:55 2015-07-07 09:45:55 0             2(1 )  8/8 0          --                SUCC 0x0          

VolIdx       = 0 
Repair Flag  = 0 
Total Steps  = 8 
Current Step = 8 
Current step remain time = 0 (min) 0 (sec) 
Fail Reason: --

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Step

Step No.

Step Name

Step name.

Start Time(s)

Time when the step starts.

End Time(s)

Time when the step ends.

Used Time(s)

Time required for completing the step.

State

Step status.

Proc

Step processing No..

CurOpt

Step option.

Repair Type

Step repair method (displayed only for specific steps).

Result

Step repair result.

ErrCode

Return code of the step.

VolIdx

Volume ID obtained.

Repair Flag

Repair flag.

Total Steps

Total number of repair steps.

Current Step

Repair step being executed.

Current step remain time

Remaining time of the step (displayed only for specific steps).

Fail Reason

Repair failure cause.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 615087

Downloads: 244

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next