No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show file_system scrub

show file_system scrub


The show file_system scrub command is used to show the scanning information about a file system.


show file_system scrub file_system_id=?






File system ID.

To obtain the value, run the "show file_system general" command.


Developer view

Usage Guidelines



To show the scrubbing information about file system 1, run the following command.

developer:/>show file_system scrub file_system_id=1 
File System ID : 1  
Running Status : Finished  
Range : All Metadata And Data  
Mode : Checksum  
Speed : Customized  
Scrub Object ID : --  
Scrub Object Set ID : --  
Scrub Path : --  
Start Time : 2015-03-24/14:17:44 UTC+08:00  
End Time : 2015-03-24/14:17:44 UTC+08:00  
Checksum Errors : 0  
Stripe Errors : 0  
Other Errors : 0  
Process(%) : 100  
Total Scaned Capacity(Byte) : 1069056  
Scrubbing Speed(Bps) : 1069056 
Log File System ID : 2 
Concurrency Number : 150  
Scrub Object ID Range : -- 
Scrub Transaction Number Range : 100-200 

System Response

The following table describes the parameter meanings.



Running Status

Running status.


Scanning range.


Scanning mode.


Scanning speed.

Start Time

Scanning start time.

End Time

Scanning end time.

Other Errors

Number of other errors.

Checksum Errors

Number of checksum errors.

Stripe Errors

Number of stripe errors.


Scanning progress.

File System ID

File system ID.

Scrub Object ID

Object ID.

Scrub Path

Local scanning path.

Total Scaned Capacity(Byte)

Total scanned amount.

Scrub Object Set ID

Object set ID.

Scrubbing Speed(Bps)

Speed per second.

Scrub Object ID Range

Range of object IDs.

Log File System ID

ID of the log file system.

Scrub Transaction Number Range

Range of transaction numbers.

Concurrent Number

Concurrent number.

Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 633725

Downloads: 253

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next