No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mrr repairextentcountshow

mrr repairextentcountshow

Function

The mrr repairextentcountshow command is used to view the status of metadata counter repair.

Format

mrr repairextentcountshow

Parameters

None

Views

Diagnostic view

Usage Guidelines

None

Example

View the metadata counter repair status.

admin:/diagnose>mrr repairextentcountshow 
        Repair zone ckg bitmap info: 

        Disk Domain ID         : 4294967295 
        Is repairing             : No 
        Result                   : Pool is not repaired! 
        Fail Reason              : -- 
        Begin Time               : -- 
        End Time                 : -- 
        Total Zone Number        : 0 
        Processed Zone Number : 0 
        Repaired Fail Zone Number: 0 

        Index  Zone ID  Alloc Extent  Origin Extent  Conflict CKG  Result 
        -----  -------  ------------  -------------  ------------  ------ 
        success...

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Disk Domain ID

Indicates the disk domain ID.

Is repairing

Indicates the repair status.

Result

Indicates the result of the operation.

Fail Reason

Indicates the reason why the operation fails.

Begin Time

Indicates the begin time of the operation.

End Time

Indicates the end time of the operation.

Processed Zone Number

Indicates the count of processed zones.

Total Zone Number

Indicates the count of zones that require processing.

Repaired Fail Zone Number

Indicates the count of zones that fail to be repaired.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 583933

Downloads: 233

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next