No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
grain showMergeSmallTreeItem

grain showMergeSmallTreeItem

Function

The grain showMergeSmallTreeItem command is used to view bitmap information about small blocks on a merging tree.

Format

grain showMergeSmallTreeItem file_system_id type start_extent_id

Parameters

Parameter

Description

Value

file_system_id

File system ID.

To obtain the value, run the "show file_system general" command.

type

Data type.

The value can be "0" or "1", where:

  • "0": metadata.
  • "1": data.

start_extent_id

Start extent ID.

The value is a hexadecimal number in the format of "0X". You can enter "0".

Views

Diagnostic view

Usage Guidelines

This command is applicable only to the local controller.

Example

View bitmap information about small blocks on the merging tree of file system "0".

admin:/diagnose>grain showMergeSmallTreeItem 0 0 0 
ExtentId : 0x40004000101a 
Bitmap : 
           0:0000111000010000 
           1:0000000000000000 
           2:0000111111111111 
           3:1111111111111110 
         4:0000000000000000 
           5:0000000000000000 
           6:0000000000000000 
           7:1111111100000000 
           8:0000000000000000 
           9:0000000000000000 
           10:1111000001000100 
           11:0000000000000000 
           12:0000001111100101 
           13:1111111111111110 
           14:1111110111111111 
           15:1111111111111101 
           16:1010101111111111 
           17:0000000000000000 
           18:0011111111010000 
           19:1111111100011111 
           20:0000000000000000 
           21:1111111000000111 
           22:0000000000000000 
           23:1111111111110000 
           24:0000000001111111 
           25:0000000000000000 
           26:0000000000000000 
           27:0000000000000000 
           28:1111111100000000 
           29:0000000000000000 
           30:0000000000000000 
           31:0000000000000000

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ExtentId

Extent ID.

Bitmap

Bitmap information.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 635307

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next