No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
rsf showlunrss

rsf showlunrss

Function

The rsf showlunrss command is used to view the types of replication services created on a LUN.

Format

rsf showlunrss lunid

Parameters

Parameter

Description

Value

lunid

LUN ID.

0 to maximum number of LUNs minus 1.

Views

Diagnostic view

Usage Guidelines

This command must be executed on the master node of a cluster.

Example

View the types of replication services created on LUN 0.

admin:/diagnose>rsf showlunrss 0 
LUN[0] type bit is 44000004210000 
LUN ID Mapped CpySrc CpyDst ClnMaster ClnSlave LmSrc LmDst LmrLun LmrCopyLun RmMaster RmSlave SnapSrcLun SnapLun 
-------- ------ ------ ------ --------- -------- ----- ----- ------ ---------- -------- ------- ---------- ------- 
0 1 1 0 1 0 0 0 0 0 0 0 1 0  

System Response

The following table describes the parameter meanings.

Parameter

Meaning

LUN ID

Specifies the ID of the LUN whose replication service types you want to view.

Mapped

Indicates whether the LUN is mapped to a host.

CpySrc

Indicates whether the LUN is the source LUN of a LUN copy.

CpyDst

Indicates whether the LUN is the target LUN of a LUN copy.

ClnMaster

Indicates whether the LUN is the primary LUN of a clone.

ClnSlave

Indicates whether the LUN is the secondary LUN of a clone.

LmSrc

Indicates whether the LUN is the source LUN of a LUN migration.

LmDst

Indicates whether the LUN is the target LUN of a LUN migration.

LmrLun

Indicates whether the LUN is a mirror LUN.

LmrCopyLun

Indicates whether the LUN is the mirror copy LUN.

RmMaster

Indicates whether the LUN is the primary LUN of a remote replication.

RmSlave

Indicates whether the LUN is the secondary LUN of a remote replication.

SnapSrcLun

Indicates whether the LUN is the source LUN of a snapshot.

SnapLun

Indicates whether the LUN is a snapshot.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 636275

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next