No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
xrb showintermem

xrb showintermem

Function

The xrb showintermem command is used to show usage of internal resources on a connection.

Format

xrb showintermem -s seqid

Parameters

Parameter

Description

Value

seqid

Logical connection ID of XNET.

The value ranges from 0 to 0xffffffff.

Views

Diagnostic view

Usage Guidelines

None

Example

Show usage of internal resources on connection "16".

admin:/diagnose>xrb showintermem -s 16 
Show conn(16) internal resouce info: 
Recvd Shells: 16 
TX_Alloc REQ: 127 
TX_Req Msg: 128 
TX_Post Msg: 128 
TX_Response: 128 
RX_Local SGL: 128 
RX_TimeoutCTX: 128 
RX_Resp Msg: 128

System Response

The following table describes the parameter meanings.

Parameter

Meaning

conn

Connection ID.

Recvd Shells

Count of Recvd Shell at the receiver end.

TX_Alloc REQ

Count of Alloc Req at the sender end.

TX_Req Msg

Count of request messages at the sender end.

TX_Post Msg

Count of post messages at the sender end.

TX_Response

Count of responses at the sender end.

RX_Local SGL

Count of Local SGL at the receiver end.

RX_TimeoutCTX

Count of timeout contexts at the receiver end.

RX_Resp Msg

Count of response messages at the receiver end.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 616022

Downloads: 244

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next